Why You’ll Love It
Stop leaks before they start and protect your home from costly water damage. This professional-grade, penetrating waterproof adhesive creates a flexible, breathable, and incredibly strong barrier that seals cracks and prevents moisture infiltration on a wide variety of surfaces. Perfect for DIY repairs and preventative maintenance.
Key Features
- Instant Application: Ready to use straight from the bottle – no mixing or complicated setup required.
- Superior Penetration & Adhesion: Seeps deep into porous materials like concrete, brick, and wood for a bond that’s stronger than the surface itself.
- Flexible & Breathable Seal: Forms a durable, elastic coating that moves with structural shifts without cracking, while allowing vapor to escape (impermeable to liquid water).
- Self-Healing Properties: Minor scratches or hairline cracks in the coating can reseal themselves, maintaining long-term waterproof integrity.
- Multi-Surface Formula: Works effectively on wood, brick, concrete, tile, marble, and more for comprehensive leak protection.
- Long-Lasting Protection: Provides a tough, anti-aging barrier that resists wear and weather for enduring waterproofing.
Technical Specifications
- Net Content: 100g
- Primary Ingredients: Ethyl Acrylate, Hydroxyethyl Cellulose, Calcium Carbonate, Butoxyethanol, Dimethicone.
- Key Properties: Polyurethane-based, high toughness, penetration wear resistance.
- Physical Form: Liquid coating/adhesive.
- Kit Includes: 100g bottle of sealant and an application brush.
- Dimensions: Bottle: 6.3*5.7cm; Brush: 12.3*2cm.
How to Use / Applications
- Surface Preparation: Thoroughly clean the base surface (floor, wall, joint, etc.). It is critical that the surface is completely dry and free of dust, grease, or loose particles.
- Application: Open the cap and apply directly using the provided brush. For larger cracks or joints, you can first pave with non-woven fabric or glass fiber cloth, then apply the adhesive over it for reinforced sealing.
- Curing: Allow the product to cure. Protect the applied area from rain and water immersion for at least 24 hours after application.
- Important Note: Do not apply if the temperature is below 5°C (41°F), as this will affect curing and performance.
Ideal For: Sealing leaks around bathtubs, showers, and toilets; waterproofing exterior walls and balconies; repairing cracks in concrete floors or foundations; sealing tile grout lines; and protecting wooden decks or window sills.
Frequently Asked Questions
Q: How long does it take to dry?
A: The surface may feel dry to the touch within a few hours, but it requires a full 24 hours to cure properly and become fully waterproof. Avoid contact with water during this period.
Q: Can I paint over it?
A: Yes, once the sealant is fully cured (after 24 hours), most paints and topcoats can be applied over it. We recommend testing a small area first.
Q: Is it suitable for stopping an active leak?
A: Yes, it is designed for quick leak stopping. However, for best results, the surface should be as dry as possible during application. For major pressurized leaks, the source should be addressed first.
Q: What’s the coverage area for a 100g bottle?
A> Coverage depends on the surface porosity and application thickness. On average, a 100g bottle can cover approximately 0.5 to 1 square meter for a standard coating.








Reviews
There are no reviews yet.